More than half of all manufacturers will be testing or using fifth-generation cellular wireless technology (aka 5G) in some capacity by the end of 2021, according to a new study from The Manufacturing Institute. The big numbers:
- 91% of manufacturers believe 5G connectivity will be important to the overall future of their businesses.
- 91% of manufacturers indicate speed of 5G deployment will have a positive impact on their ability to compete globally.
- 88% of manufacturers indicate 5G connectivity will allow engineers to troubleshoot remotely.
All-encompassing: 5G is poised to help manufacturers in almost every part of their businesses, according to the study.
- Nine in ten manufacturers expect the utilization of 5G to lead to the creation of new processes (88%) and new businesses (86%). It can make supply chains more efficient and both machines and workers more productive. It also will likely lead to new improvements no one has anticipated yet.
Drilling down: Let’s look at just one facet of 5G’s potential impact: its effects on factory operations. This is how comprehensive the 5G transformation is expected to be:
- Four-fifths of manufacturers indicate 5G technology will be important to inventory tracking (83%), facility security (81%) and warehousing and logistics (81%) within their facilities.
- Three-fourths of manufacturers indicate 5G will also be important to inspection (76%) and assembly (76%) activities, with seven in ten saying packaging (72%) and employee training (71%) efforts will benefit from the deployment of 5G.
And let’s not overlook the fact that more than 90% of manufacturers expect cost savings of approximately 38% from their 5G connections.
Competitive advantage: “Manufacturers’ competitiveness depends on their ability to continuously improve the efficiency and effectiveness of their operations, and disruptive technologies are changing the way that firms innovate and produce,” said the Institute’s Center for Manufacturing Research Director and NAM Chief Economist Chad Moutray.
More information: You can join the Institute for a webinar on 5G technologies on Tuesday, April 6, at 2:00 p.m. ET. Register here.
Derek Read always knew he wanted to join the Navy, and he enlisted after high school—rising to become a machinist’s mate responsible for maintaining, repairing and running the ship’s engine as well as corresponding machines and equipment. However, when it came time to find his next career nine years later, he wasn’t sure what to do—until his research turned up the The Manufacturing Institute’s Heroes MAKE America program, which helped Read translate the skills he already had into a modern manufacturing setting.
- “It’s definitely been enlightening,” said Read. “For the most part, I had the mechanical background and most of the skills, but HMA bridged the gap and gave me some technical expertise, as well as the extensive knowledge and certifications needed to get hired by a manufacturing company. Overall, it’s been an amazingly positive experience.”
One-on-one: Some of Read’s most valuable experiences were his meetings with executives and hiring officers at different manufacturing companies.
- “One of the greatest things they’ve given us is facetime with manufacturing company VPs, HR representatives and recruiters,” said Read. “They allowed us to get a better understanding of what was out there and what companies were looking for. Facetime like that is hard to come by unless you’re doing a specialized program like this, and it’s worth a lot.”
What’s next: Today, Read is fielding a few different job interviews, which he received via LinkedIn after Heroes helped him create his profile on the site. “Without HMA, I probably wouldn’t have been approached by those companies,” said Read.
Paying it forward: When asked what advice he’d give to other transitioning servicemembers considering the Heroes program, Read didn’t hesitate. “That’s easy—you’d be crazy not to take advantage of an amazing opportunity like this,” said Read. “The HMA program is outstanding. Take advantage of programs like this one, and don’t wait. Different manufacturing companies have a vast array of jobs. There’s definitely a job out there for you.”
From a distance: What makes Read’s enthusiasm all the more compelling is that he experienced the entire program remotely. But with the help of some virtual reality tools, he was able to participate without missing a step.
- “The VR goggles—that was amazing,” said Read. “I’ve never played with VR before. It’s almost like a video game. The training and tool seminars—I got to play with different tools and interact with the VR, doing measurements, calibrating equipment and going over parts of the manufacturing facility. It was a lot of fun to play with.”
That kind of substantive learning in an engaging environment is what the Caterpillar Foundation will bring to more heroes in the coming years, thanks to its new $2.25 million donation designed to help Heroes MAKE America increase its integration of virtual reality technology and expand training opportunities for the military community.
The last word: As Caterpillar Chairman and CEO Jim Umpleby said when the partnership was announced, “Caterpillar is proud of the support provided to veterans and their families through the Caterpillar Foundation’s donation to the Heroes MAKE America program. I am pleased the Foundation can help make this world-class skills training program available to all members of the global military community and connect them to careers in manufacturing.”
The NAM and The Manufacturing Institute are launching the Yellow and Red Ribbon Initiative today to encourage vaccinations against COVID-19. Here’s what you need to know to get involved.
What it means: The ribbon is designed with two colors: yellow, which shows that we support one another, and red, which signifies that we care for one another. Wearing or displaying yellow and red ribbons is intended to serve as a sign of support for COVID-19 vaccination and a signal that you have been personally vaccinated.
Why do it: “It’s the same philosophy behind ‘I Voted’ stickers,” said NAM President and CEO Jay Timmons. “Seeing that others have been safely vaccinated sends a powerful message to those who have not yet made the decision to get their shot.”
What you can do: You can wear the ribbon to work or out in public, or in your social media profile pictures. If you’re an employer or run a vaccination site, you can make the ribbons available to those who get their shot.
How to get your pins: The NAM and the MI are producing yellow and red pins to distribute to workers, families and communities and have developed tools such as bilingual social media, email and newsletter copy and posters to support distribution.
- Bulk orders can be made online here. The NAM and MI are also encouraging a grassroots effort in communities nationwide, urging people to make ribbons at home, find them online or locate them at a craft store.
What we’re building on: Getting manufacturers and Americans their COVID-19 vaccines is a key step toward ending the pandemic. See how the NAM and MI are working to get that done through its “This Is Our Shot” project.
Zachary Willis has transitioned out of the military twice—and the second time, The Manufacturing Institute’s Heroes MAKE America program made all the difference.
A passion for service: Willis had wanted to join the Marine Corps his entire life and felt even more strongly about it after 9/11. A little less than a year after he graduated high school, he did so. “I wanted to serve my country, and my country needed me,” he told us.
Two exits: Willis spent four years in the Marine Corps on active duty, with two deployments as an infantryman. He spent the next four years in the reserves, then left the military for a short stint in the civilian world. But feeling adrift, he ended up joining the U.S. Army as a mechanic in 2017.
When health issues led him to transition out of the military a second time, he knew he needed a strategy for what would come next. The Heroes MAKE America program, which helps members of the military community find opportunities in manufacturing, sounded like a great fit.
- “Getting out this time around was so different from the first time,” said Willis. “The first time I didn’t really have a plan. This time I was a lot more mature. I was like, I need to make sure there is something out there—and Heroes MAKE America seemed like a great opportunity to get into an industry with a lot of growth potential.”
A different world: Heroes exposed Willis to a world of modern manufacturing that was well beyond what he had expected.
- “I always thought manufacturing was just a bunch of guys on an assembly line who put things together for 30 years and then retired,” said Willis. “But then I got into this program, and I saw how innovative it is. It’s constantly seeking improvement. It’s so different from the manufacturing of my father’s or grandfather’s generation.”
An expanded network: Willis is enthusiastic about his experience in the Heroes program—both in terms of the skills training and the opportunities to explore career options.
- “It’s been amazing,” said Willis. “The ability to reach out and connect with other employers all around the country—from smaller companies to huge international corporations. You don’t see that in very many places. I wish more people took advantage of programs like this.”
What’s next: Willis graduated from the program in early March and received four different job offers. He’ll start a new role soon manufacturing gunpowder at Hodgdon Powder Company near his home in Kansas. In fact, he’s so enthusiastic about the Heroes MAKE America program that he’s already encouraging his new employer to get involved.
- “The company isn’t even a part of the program, and when I told them about it, they said, huh, we gotta look into that,” said Willis. “It’s something more companies should get on board with.”
Heroes gets a boost: Willis also got to take on a new challenge during his program: using virtual reality technology to supplement his instructor-led hands-on learning. The technology let him learn everything from how to put on personal protective equipment correctly in a manufacturing environment to how to use welders, micrometers and digital calipers.
And as it happens, even more Heroes students will be able to engage virtually in the coming years. Thanks to a new $2.25 million donation from the Caterpillar Foundation, the Heroes program will be able to increase its integration of virtual reality technology and expand training opportunities for the military community.
The last word: “Caterpillar is proud of the support provided to veterans and their families through the Caterpillar Foundation’s donation to the Heroes MAKE America program,” said Caterpillar Chairman and CEO Jim Umpleby. “I am pleased the Foundation can help make this world-class skills training program available to all members of the global military community and connect them to careers in manufacturing.”
If you’re a manufacturer looking to begin—or improve—your diversity and inclusion efforts, you’ll need some expert advice. That’s why The Manufacturing Institute—the workforce development and education partner of the National Association of Manufacturers—hosted a virtual summit recently on D&I development, drawing together a variety of experts in one comprehensive event. Now you can watch the event online, and to get you started, we’ll give you a quick overview.
Why it matters: Manufacturing workers are deeply diverse in all sorts of ways: age, gender, race and ethnicity, ability and sexual orientation—not to mention education, life experience and socioeconomic background. To be competitive, businesses must be able to connect with the skills and experiences of a wide range of communities.
The main events: The first day of the summit was broken down into several “dimensions” of D&I, each with its own panel of experts:
- Race Dimension: Representatives from HBCU Connect, Pfizer and Ingredion discussed how leaders can promote racial equity in their companies and communities—including by setting measurable hiring goals and increasing internal candidate development.
- Ability Dimension: Panelists from Autism Speaks, Stanley Black & Decker and Lee Container Corporation discussed their work with manufacturers to create 1 million employment and leadership opportunities by 2025 for people with autism and intellectual and/or developmental differences. The panelists highlighted data showing how neuro-diverse individuals strengthen the workforce overall.
- Sexual Orientation Dimension: Representatives of Out Leadership and Dow spoke about how manufacturers can stand up for LGBT+ equality and D&I overall. They recommended supporting LGBT+ equality by being vocal allies and signing on to court cases that protect LGBT+ rights. They also talked about why bringing your whole self to the workplace is critical.
- Military Dimension: Panelists from the MI, Fender Musical Instruments Corporation and Johnson & Johnson discussed how manufacturers can connect directly to transitioning service members, veterans, the National Guard, reservists and active-duty military spouses, including through programs like the MI’s Heroes MAKE America—an integrated training, certification and career-readiness initiative.
- Gender Dimension: Panelists from the MI, Fresenius Medical Care North America and BASF Corporation discussed the steps companies can take to support women in manufacturing—such as creating supportive women-led networks within their businesses and ensuring uniforms are available in female sizes. They also noted the critical progress made so far by programs like the MI’s STEP Women’s Initiative and through local employee resource groups.
- Age Dimension: With one-quarter of the manufacturing workforce over 55 years old, manufacturers must adapt to the needs of older workers. Panelists from AARP, ALOM and Winton Machine Company discussed the importance of two-way learning and how creating mentor–mentee relationships between younger and older employees can build a stronger workforce.
And that’s not all. . . Day Two featured an executive panel titled “Voices from Leadership,” with leaders from the MI, Arconic, Intel Corporation and Deloitte. It also included a goals-oriented panel called “Building D&I Into Team and Individual Goals,” featuring speakers from the MI, BP America, Trane Technologies and Covestro, which focused on how to put this work into practice.
The last word: “We need to close the racial inequities and the gaps that we have in our society because it is the right thing to do, but it is also the economic imperative for our sector,” said MI Executive Director Carolyn Lee. “We need more people—and the workforce of the future is going to look different than the workforce of today.”
Union Pacific is seeking a more diverse workforce as it strives to continue “building America,” as it says. To do so, it is partnering with The Manufacturing Institute, the NAM’s workforce development and education partner, on a $3 million three-year joint initiative. Beth Whited, who serves as executive vice president and chief human resource officer at Union Pacific, recently told us more about these ambitious plans.
The details: The initiative, called Careers on Track, will work to inspire more women and youth to pursue modern industry careers. The funding supports workforce development and career solutions that will include:
- A new digital STEM curriculum;
- A virtual STEM experience—in which participants can “choose their own adventure” while exploring interactive 3D models of a real facility, locomotive and more;
- A STEM micro-grant program for young people; and
- A digital campaign showcasing industry career opportunities for underserved women in select regions.
Ultimately, Union Pacific intends to double the number of women in the UP workforce within the next 10 years.
Why partnerships matter: “These types of partnerships are important for us because they broaden our reach,” says Whited. “We run pilot programs of our own, but it’s difficult for us to make those available in every school in our served territory. With the MI’s broad reach and established programs, we can reach more women and youth than we could on our own.”
The scope: Whited likes to remind people that nearly everything in their homes moves by rail at some point, whether as a raw material or as a finished product. That also means there is a wide range of jobs involved, from skilled roles in transportation and manufacturing to civil, electrical and computer engineering—jobs that involve designing more fuel-efficient locomotives or building the freight cars of the future.
The tech: “People who don’t know much about railroads are always surprised by the level of high tech that’s employed,” says Whited. “Railroads have been around for 160 years plus, and so people think about it as old technology, but it absolutely isn’t.
- “You’ve got unbelievable signaling systems run everything safely, next-level optimization tools that determine how and when trains run, sophisticated technology in the 4,500 horsepower locomotives that we use to haul freight and so much more. The level of tech and advanced analytics and machine technology is usually quite startling to people.”
The pitch: Whited has advice for women who are unsure about working in a traditionally male-dominated field. “I would tell people to challenge their own thinking,” says Whited. “There aren’t jobs that are for men and jobs that are for women; there are jobs—and these are great jobs with great benefits that will help you fulfill your goals and give you a sense of pride. Come try it.”
The last word: As MI Executive Director Carolyn Lee said about this partnership, “There are nearly 500,000 job openings right now in manufacturing and millions more expected over the next decade. Closing the gender gap and building awareness with young people are critical to meeting this incredible need.”
Creators Wanted, the pioneering workforce initiative from the NAM and MI, is adapting to the changing environment to continue its critical work to reduce the skills gap and end misperceptions about modern manufacturing.
What’s happening: We’ve gone virtual! The NAM and MI are still doing the Creators Wanted Tour, but they have exchanged in-person experiences for virtual ones (at least for now). The upside: these events will now be accessible to many more people.
What’s the plan: We’re kicking off our first virtual event on Tuesday, Feb. 2, at 10:00 a.m. EST. It will give you a sneak preview of what to expect during our Creators Wanted virtual events this year. (Click here for more information and to register.) After that, the NAM and MI will be making their way across the country, with virtual events aimed at different geographical areas.
What’s new and important:
- The NAM—with the MI’s support and leadership—has launched the Pledge for Action. It’s a commitment by manufacturers to take real, tangible steps to reflect the diversity of the U.S. workforce over the next decade. Taking the Pledge and supporting Creators Wanted are great ways for manufacturers to help close the opportunity gap.
- We’re collecting stories of creators around the country! Tell us about an amazing creator you know by visiting creatorswanted.org/shareyourstory.
Who’s it for: “Everyone! Well, we wouldn’t mind if everyone heard our message,” said NAM Vice President of Brand Strategy Chrys Kefalas. “But the NAM and MI specifically want to reach out to people who are ready to explore a career in manufacturing now. Maybe they’ve lost a job in the pandemic and are looking for a new career, or perhaps they’re already involved in manufacturing but want to gain the skills that will take them to the next level.”
- The NAM and MI also want to reach veterans and people who are underrepresented in manufacturing, including women, Black people and all communities of color.
- And, of course, the initiative intends to connect with young people, the next generation of creators.
Picking up where we left off: “The NAM and MI set big goals with Creators Wanted in 2020—to improve perceptions of manufacturing, reduce the skills gap and get more people into manufacturing career paths,” said Kefalas. “On Feb. 2, we will demonstrate that we can hit these goals with a new combination of virtual events, digital experiences and eventually in-person activations.”
But that’s not all… “The event will cover how we’re going to expand our impact, as well as exceed sponsor expectations. You won’t want to miss it.”
The NAM and The Manufacturing Institute have launched a large-scale project to promote vaccination among manufacturing workers and communities, called “This Is Our Shot.”
As NAM President and CEO Jay Timmons describes it, “This project builds on our months of work advocating the use of face masks and other smart health measures to protect all Americans . . . . Now is our opportunity as a country to end this pandemic. Our future depends on all of us rolling up our sleeves and getting armed against COVID-19.”
So how did they make it happen? We recently talked to NAM Vice President of Brand Strategy Chrys Kefalas about the inside story.
Why: As Kefalas puts it, “We have a crisis. Depending on which study you look at, between 30% to 40% of Americans say they will not get a COVID-19 vaccine. We have to take direct aim now at vaccine hesitancy; otherwise, we’ll have safe and effective vaccines and not enough people willing to get them to reach heard immunity.”
Why the NAM and the MI? The NAM, along with its workforce development and education partner, the MI, has a “singular power” to leverage manufacturing’s unifying position as a trusted community resource, Kefalas explains.
How: In the spirit of manufacturers everywhere, let’s take a look at how this project got made.
- First, the research: “We’ve relied on a wide range of suggestions and guidance, from manufacturers of all sizes and all sectors. We’ve also sought recommendations from the Gates Foundation, the CDC and other public health leaders,” says Kefalas.
- Second, the reach: “We’re engaging company medical officers, local health care providers and community members who can change hearts and minds about COVID-19 vaccination.”
- Third, the sights: “It’s going to take videos, photos, flyers, posters, emails—and other very visible signs that others are getting armed against COVID-19.”
- Fourth, the psychology: Research shows that a sense of group loyalty or patriotism can boost vaccination numbers, Kefalas explains. To create that sense of solidarity (and social influence), the NAM and MI will distribute red and yellow ribbon pins for those who get vaccinated—and encourage people to put up red and yellow ribbons outside their homes once their whole households have received the vaccine.
What can you do? The initiative is providing manufacturers with communications materials to share with their teams. As Kefalas says, clear, consistent and direct communication from employers and peers really helps. “And when you are conveying medical information, rely on the experts like medical officers and direct people to their medical providers,” Kefalas suggests.
All we need is love: In case you missed it, the first video in this initiative dropped yesterday, a charming short called “I Love Frank.” Kefalas explains the idea: “Caring for others is really the one message that seemed to resonate across all demographic groups. Vaccinations should be really simple, because it comes down to one thing: we want to protect the people we love.” You can’t say it any better than that.
Washington, D.C. – As worldwide cases of COVID-19 reached a sobering new milestone of 100 million people, the National Association of Manufacturers and The Manufacturing Institute—the workforce development and education partner of the NAM—are launching a new project taking direct aim at vaccine hesitancy and stopping the virus in its tracks by convincing more Americans to prepare to receive the COVID-19 vaccine. This project follows the NAM’s nearly year-long campaign imploring Americans to follow CDC guidelines, such as wearing a mask and social distancing.
The project, called “This Is Our Shot,” seeks to boost COVID-19 vaccine acceptance among manufacturing team members, their families and their communities through a multifaceted national campaign. With another grave milestone breached and the virus mutating, the country’s response and recovery is depending on manufacturing workers more than ever.
As part of the launch, the NAM released “I Love Frank,” a public service announcement highlighting why manufacturers are rolling up their sleeves to get a COVID-19 vaccine: to protect their family, coworkers and the people they love. The PSA will run across various social media and digital platforms and is the first in a series that will be released in 2021.
“One hundred million people have now been impacted by this horrible disease. Asking all Americans to roll up their sleeves and get vaccinated against COVID-19 is a pivotal step toward stopping this upward trend, putting millions of people back to work and eradicating this virus. That’s why today the National Association of Manufacturers and The Manufacturing Institute launched ‘This is Our Shot,’ to get more people armed against COVID-19 and to protect the people we care about,” said NAM President and CEO Jay Timmons.
“This project builds on our months of work advocating the use of face masks and other smart health measures to protect all Americans as we continue to share our insights with the Biden administration and state officials to help defeat COVID-19. Now is our opportunity as a country to end this pandemic. Our future depends on all of us rolling up our sleeves and getting armed against COVID-19.”
The project, live at NAM.org/ThisIsOurShot, includes six main components: (1) science-based messaging research; (2) emergency industry convening and education, such as webinars; (3) an online vaccine information hub; (4) a PSA campaign; (5) a Yellow and Red Ribbon initiative (for vaccinated individuals to show their peers they’re a part of the fight); and (6) a rapid response media and digital campaign. Resources available at NAM.org/ThisIsOurShot will be updated regularly, providing the latest information and tools for vaccine outreach and access.
The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.3 million men and women, contributes $2.32 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 63% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.
Washington, D.C. – As the National Association of Manufacturers and The Manufacturing Institute, the nonprofit workforce development and education partner of the NAM, continue to provide transformational support for the industry, the organizations announced key promotions to multiple divisions.
Among those being promoted at the NAM is Ken Monahan, to Vice President of International Economic Affairs after serving as a member of the policy team since 2015.
“Ken has been a pivotal member of our team during a volatile trade policy environment and adeptly helped our members navigate through it,” said NAM President and CEO and MI Chairman of the Board Jay Timmons. “He took on complex issues created by the pandemic and was instrumental in our successful campaign in support of U.S. congressional passage of the United States–Mexico–Canada Agreement. His expertise and experience will help manufacturers shape trade policy as we work with the incoming Biden administration.”
Additional promotions in the NAM’s policy, communications and membership divisions, as well as the Manufacturing Leadership Council, include the following:
- Kristie Arslan has been promoted to Senior Director of Member and Board Relations.
- Charles Crain has been promoted to Senior Director of Tax and Domestic Economic Policy.
- Alyssa Dixon has been promoted to Associate Director of Conference Operations.
- Nina Hawkins has been promoted to Senior Director of Membership Operations.
- Brian James has been promoted to Senior Director of Conference Operations.
- Susie Larson has been promoted to Manager in the Office of the President.
- Kevin Mullooly has been promoted to Director of Editorial.
- Joe Murphy has been promoted to Associate Director of Rapid Response.
- Megan Stewart has been promoted to Assistant Vice President of Membership.
- Dan Witherington has been promoted to Director of Council Development within the MLC.
The MI announced that Herb Grant has been named its new Vice President of Operations after serving as Director of the NAM’s Creators Wanted initiative, responsible for the operations of the manufacturing’s largest campaign to change perceptions and close the skills gap, and in recent months the Creators Respond effort, which helped mobilize and support the industry’s response to COVID-19.
“The need to attract and retain a skilled workforce continues to be manufacturers’ top concern according to the NAM’s quarterly Manufacturers’ Outlook Survey, and the MI and the Creators Wanted campaign is needed more than ever to help close the skills gap facing our nation’s manufacturers as they work to produce needed supplies to battle the pandemic. Herb’s industry experience was vital to the national response in the past several months, and now as we look at what is needed to spur our economic recovery, he will serve an important role in accelerating and expanding the impact of the MI,” said MI Executive Director Carolyn Lee. “The tremendous expansion of the MI’s work in the past year speaks to those priorities, and this new position will lead an effort to build and expand the MI’s operational systems and processes to drive the mission execution and support the annual delivery of the MI’s programs.”
Additional promotions at the MI include the following:
- Jen White has been promoted to Senior Program Manager on the Heroes MAKE America team.
- Alexandra Becker has been promoted to Manager on the Workforce team.
“Manufacturers’ ability to meet the needs of the country and be the arsenal of democracy in the most challenging year since the great recession has been on full display,” said Timmons. “The NAM and MI’s leadership throughout the pandemic is made possible by the people that comprise our best-in-class staff. Each one of these individuals has gone above and beyond their current roles and repeatedly delivered results for manufacturers in America. In their new roles, they will be an integral part of moving our industry forward beyond the COVID-19 pandemic and addressing the challenges in the years ahead.”
The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.3 million men and women, contributes $2.33 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 63% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.
The MI grows and supports the manufacturing industry’s skilled workers for the advancement of modern manufacturing. The MI’s diverse initiatives support all workers in America, including women, veterans and students, through skills training programs, community building and the advancement of their career in manufacturing. As the workforce development and education partner of the NAM, the MI is a trusted adviser to manufacturers, equipping them with resources necessary to solve the industry’s toughest challenges. For more information on the MI, please visit www.themanufacturinginstitute.org/.